Description

Connector Pack for 110V RGB Neon Lights (10x20mm Eco Series)

This connector pack provides a reliable and secure method to connect or extend your 110V RGB neon rope lights. Designed specifically for the 10x20mm Eco Series, it ensures safe and efficient performance for your lighting setup. Whether you’re customizing lengths or creating seamless connections, this pack is the perfect solution for indoor and outdoor lighting projects.

Connecting Method:

Follow these steps to connect the wire with the LED neon rope light:

1. Prepare the Neon Rope Light:

• Cut the neon rope light to the desired length at the marked cutting points. Ensure the cut is clean and straight to avoid any damage to the internal circuit.

• Use a sharp utility knife or a similar cutting tool for precise results.

2. Insert the Connector Pins:

• Align the 2-prong connector pins with the internal copper contact points of the rope light.

• Carefully insert the pins into the rope light, ensuring a secure connection. The pins should pierce the insulation to make proper contact with the internal wires.

3. Attach the Connecting Wire:

• Connect the opposite end of the pins to the provided connection wire. Ensure that the pins fit snugly into the wire slots for a stable connection.

• For RGB lights, ensure that the wiring aligns correctly with the red, green, and blue channels to maintain proper color functionality.

4. Seal the Connection:

• Slide the included heat shrink tube over the connection point. Ensure that the tube fully covers the area where the wire meets the rope light.

• Use a heat gun or hair dryer to shrink the tube securely around the connection. This step provides insulation and waterproofing for outdoor use.

5. Test the Connection:

• Before finalizing the installation, plug in the neon rope light and test its functionality. Confirm that the light operates properly and the colors change as intended.

6. Secure and Mount:

• Use the provided mounting clips and screws to install the rope light securely on the desired surface. Ensure the connections are not stressed or exposed to sharp bends.

Package Includes:

• Connecting Wires: 2 pieces (3.28ft each)

• Connector Pins: 10 pieces

• Heat Shrink Tubes: 2 rolls (20 inches each)

• End Caps: 1 piece

Tips for Safe Installation:

• Always unroll the rope light coil fully before testing or installation.

• Keep all connections protected with silicone glue and heat shrink tubing for outdoor use to prevent water ingress.

• Avoid bending the rope light at sharp angles to protect the internal circuits.

• Use proper tools and safety precautions during installation to avoid damage or electrical hazards.